Monitor refresh rate test
In short: open this page on the monitor you want to check and wait 6 seconds. The test shows the refresh rate your screen is actually running at — 60, 120, 144, 165 or 240 Hz. Pick the rate your monitor is rated for, and the test tells you whether they match and, if not, why. Below is a UFO test: a saucer moving at three speeds reveals ghosting and overdrive overshoot.
Everything runs in your browser — nothing to install.
1. Current refresh rate
— Hz
A 5-second measurement starts in a second. Don’t scroll or switch tabs.
- Resolution
- —
- Scale (DPR)
- —
- Frames measured
- —
- Dropped
- —
2. UFO test: ghosting and overdrive
Three saucers move at the same speed but update differently: the top one every frame, the middle one every other frame, the bottom one every fourth frame. This shows what a higher refresh rate gives you. The trail behind the top saucer depends on the panel’s response time.
Follow the top saucer with your eyes, not the edge of the screen. The windows and yellow lights should stay readable. A dark trail means a slow panel. A bright or coloured halo, most visible on grey, means overdrive is too strong — lower it in the monitor menu (Overdrive, Response Time, Trace Free).
Everything runs in your browser: measurements are not sent anywhere. The rated refresh rate you pick is stored only in this browser.
What’s next
Dead pixels
Fill the screen with solid colours to check a new monitor before the return window closes.
Test it →Graphics cards
Will your GPU push games as fast as your monitor refreshes? Compare models side by side.
Compare →Reaction time
See how fast you react — a high refresh rate shaves milliseconds off the result.
Test it →Telecom Digest newsletter
A daily digest of gadget and tech news. No spam, one-click unsubscribe.
By subscribing you agree to receive Telecom Digest e-mails and accept our privacy policy. Unsubscribe in one click.
How to use
- Open the page on the monitor you’re checking. With several monitors, drag the browser window to the right one.
- Don’t scroll for 6 seconds: the test measures the rate and shows it in large type, e.g. “144 Hz”.
- In “My screen is rated for”, pick the rate from your monitor’s specs — the test compares it with the measurement and tells you what to check.
- Start the UFO test and follow the top saucer with your eyes to see blur, ghosting and overshoot.
- Changed a setting or a cable? Click “Measure again”.
How the test measures refresh rate
The browser redraws the page in sync with the screen and calls requestAnimationFrame before each frame. For 5 seconds the test records the time of every call and averages the intervals: a 16.67 ms frame is 60 Hz, 6.94 ms is 144 Hz, 6.06 ms is 165 Hz. Random hiccups don’t skew the average: long intervals are counted as dropped frames and shown separately. Accuracy is a fraction of a hertz, and the result is rounded to the nearest standard rate.
If you switch tabs mid-test, the browser nearly stops drawing the background page. The test pauses at that moment and resumes when you return, and the time spent in the background is left out. So you won’t get a false “30 Hz” from a background tab.
Why a 144 Hz monitor shows 60 Hz
- The rate isn’t selected in the system. Windows often runs a new monitor at 60 Hz. Windows 11: Settings → System → Display → Advanced display → Choose a refresh rate. macOS: System Settings → Displays.
- Cable or port. See the table below. On a desktop, plug the monitor into the graphics card, not the motherboard.
- Power saving. Laptops on battery drop to 60 Hz. Energy Saver in Chrome and Edge caps animation at 30 fps.
- Safari. On iPhone, iPad and Mac, Safari renders pages at up to 60 Hz by default, even on a 120 Hz ProMotion screen. That’s a browser limit, not the screen.
- The window is on another monitor. The browser uses the refresh rate of the screen the window is on.
- Variable refresh rate. G-Sync, FreeSync and LTPO lower the rate when nothing moves. Start the UFO test and measure again.
Which cable carries which refresh rate
| Connection | Full HD (1080p) | QHD (1440p) | 4K (2160p) |
|---|---|---|---|
| HDMI 1.4 | up to 120 Hz | up to 75 Hz | 30 Hz |
| HDMI 2.0 | up to 240 Hz | up to 144 Hz | 60 Hz |
| HDMI 2.1 | 240 Hz and up | up to 240 Hz | up to 144 Hz |
| DisplayPort 1.2 | up to 240 Hz | up to 165 Hz | 60 Hz |
| DisplayPort 1.4 | 240 Hz and up | up to 240 Hz | up to 144 Hz (with DSC) |
Figures are for 8-bit colour; HDR and 10-bit colour lower the limit. Your monitor’s exact maximum is in its manual.
UFO test: reading ghosting and overdrive
Your eye tracks a moving object while the screen holds each frame still until the next refresh. So the saucer blurs more at lower refresh rates: at 960 pixels per second it jumps 16 pixels per frame at 60 Hz and 7 pixels at 144 Hz. Compare the top row with the lower ones — the difference is what a high refresh rate buys you.
A dark trail behind the saucer means the panel can’t switch pixels fast enough; VA panels do this in dark scenes. A bright or coloured halo in front of or behind the saucer, best seen on the grey background, is overshoot from overdrive set too high. Pick a medium Overdrive level in the monitor menu: it usually gives the fewest artefacts.
What the test can’t check
Browsers don’t let websites read the panel’s response time in milliseconds, input lag, G-Sync or FreeSync support, or the monitor’s maximum rated refresh rate. The test measures what can be measured honestly: the rate your screen is running at right now and dropped frames. Check a phone’s touch screen in the screen test and dead pixels in the dead pixel test.
Other device tests
- Screen and touch test
- Dead pixels
- Microphone
- Webcam
- Keyboard
- Mouse
- Headphones and stereo
- Gamepad
- Phone IMEI
- Water eject
- What phone do I have
- Internet speed
- Apple serial number
- Reaction time
- CPS test
- Phone number lookup